DISCONTINUED PRODUCT.
Sliding Gates
Linestar
Perfect solution for DIY or home handyman gate automation. It has been designed for sliding gates where limited space is available, with its internally adjusted CAM design and no need for conventional limit brackets
When the highest degree of comfort, performance and safety are required, Linestar technology elevates the potential of the operator, particularly:
No more black outs
The 24V electronics automatically detect any absence of power and activate the
emergency back up batteries, to open and close the gate.
Frequent passages
The low-voltage gearmotor guarantees functioning even in the harshest of working
conditions, such as in apartment blocks and in other collective settings.
Quick openings
Adaptable to all needs, the 24V electronics enable the adjustment of the working speed of the gate leaves and provide for a smooth, soft closing as well.
Obstacle detection
A special electronic circuit constantly sweeps for any obstacles to the gate leaves, and if needed stops or inverts the direction of movement.
Supply Voltage | 230VAC 50/60Hz |
Motor Voltage | 24V DC |
Motor Power | 170W |
Opening Speed | 170 mm/sec |
Duty Cycle | 50% |
Warranty | 2 Years |
Operating T° | -20°C / +55°C |
Max Gate Weight | 300 Kg |
Max Gate Length | 6m |
IP Rating | IP54 |
Limit Switch | Adjustable CAM |
CLIK4M | Four Channel Transmitter. |
MT6201 | Plug in Receiver Card. |
CS36 | Safety Photocell Beams. |
MTR-BATT | Back Up Battery Kit |
LT-RACK | Rack in nylon and fiberglass with steel core in module 4, with securing holes and distances, for sliding gates of up to 300 Kg. |