Ozak BTX-300 turnstiles

BTX 300 N1 S / D Turnstiles

The full-height system for controlling high-traffic passages

A full-height turnstile for locations aiming for pedestrian access control and high-level security.
Offers more comfortable passages compared to 4 arm versions.
Provides two passageways with the installation of a single turnstile (double versions).
Having less than a 98mm gap between upright bars complies with UK Health and Safety Standards and is supplied optionally with different materials.
The top lid is equipped with a damper for safety and service convenience.
Optional intelligent illumination system provides energy saving feature (illuminating automatically in darkness/at night and optionally can
run parallel with site illumination).
Three-section rotor (120o). Each section contains nine Ø42×2.5 mm electrostatic powder coated hot dip galvanized or Ø40×2 mm stainless steel (opt. Ø38, Ø42 and Ø45 mm) arms.
All inputs are optocoupler protected. Compatible with all access control systems that provide dry contact or grounding outputs. An optional RS232/RS485/TCP IP control module is available.

SKU: BTX 300 N1-S/100 (304)

SKU: BTX 300 N1-S/100 (316)

Technical Specifications

BTX 300 N1 Single

Weight (kg): 200

Protection rating (IP): 56

Power supply (V-50/60Hz): 110 – 220AC

Stand-by consumption: 8 Watt – 20 Max

Number of passages per min: 48 max *

Operating temperature (˚C): -20 ÷ +68

MCBF:

*Please see technical manual for full details..

Technical Features
Body Features 304-grade (opt. 316-grade) brushed finished stainless steel, electrostatic painted surface or mixed combination versions. (opt. hot dip galvanizing under coating for outdoor models).

Complying to UK H&S regulations of max. 98 mm gap between upright profiles.
Top lid is equipped with damper for safety and service convenience.

Optional intelligent illumination system provides energy saving feature (illuminating automatically in darkness/at night and optionally can
run parallel with site illumination).

Arm Features Three-section rotor (120o). Each section contains nine Ø42×2.5 mm electrostatic powder coated hot dip galvanized or Ø40×2 mm stainless steel (opt. Ø38, Ø42 and Ø45 mm) arms.

Power Requirements 110/220-240 V. 60/50Hz. AC (%±10) 24V. DC at standby ~8W. max. ~20W.

Control System All inputs are opto-coupler protected. Compatible with all access control systems that provide dry contact or grounding outputs.

Optional RS232/RS485/TCP IP control module is available.

Flow Rate Capacity of mechanism (manual) : Max. 60 pass/min. Nominal : ~18 pass/min.
Capacity of mechanism (motorized) : Max. 48 pass/min. Nominal : ~15 pass/min.
*Utilisation of different access control units can change the flow rate.

Emergency Mode System allows free passage in emergency mode and in case of power failure.

Operation Temperature, Humidity, IP Rating -20°C to +68°C (opt. -50°C with heater unit), RH 95% non-condensing / IP 56 outdoor model (opt. IP 66).

Operation Manually operated bi-directional system (optional motorized) with dip switch selectable operational modes including controlled access on both sides, one side free (exit or entry) and other side controlled access and access restriction modes.

Optional Accessories and Applications
Remote control units, interface unit for PC, RS485, RS232 and LAN, counter, audio-messaging system, bottom plate, coin slot/intelligent coin system and coin box, card reader pole, seat limiter for stadium solutions, animated indicators, internal battery and charge unit, motor driven unit, heater positive unit, separators, canopy, card reader mounting bracket, special illumination adaptation.