HC
Concrete pillar hinge carrier, ready for installation for use with GH gate hinge when block or brick pillars are being built. Makes the hinges adjustable.
Type of hardware
HB
Heavy duty solid steel hinge carrier 65mm x 38mm wide grease nipple for lubrication. Welds onto the gate.
GH250
Galvanised gate hinge with double lock nuts and washers 250mm (Length) with 70mm (Height) hinge pin x 20mm gudgeon.
GH80
Galvanised gate hinge with lock nut. 80mm (Length) with 70mm (Height) hinge pin x 20mm gudgeon. To be used with the HC and CHC carriers and HB boss.
HC
Hinge carrier for already erected pillar. Drill hole in pillar and glue or chemset carrier in place. To be used with GH gate hinge to make the hinge adjustable.
161-M24
Hinge with mounting plate.
120-M24
Hinge with weld in bush.
87PST
Bottom hinge with thrust bearing and plate.
87
Bottom hinge with thrust bearing.
86L-P
Steel adjustable upper hinge with 45mm wide zinc-plated L plate. Ø45mm bearing surface, 200kg Rating. Use with the 87L-P Bottom Bearing hinge for maximum performance.
85L-M
Steel adjustable upper hinge with 50mm wide zinc-plated L plate. Ø50mm bearing surface, 350kg Rating. Use with the 87L-M Bottom Bearing hinge for maximum performance.
85L-G
Steel adjustable upper hinge with 70mm wide zinc-plated L plate. Ø70mm bearing surface, 500kg Rating. Use with the 85L-G Bottom Bearing hinge for maximum performance.
85PST-M
Steel adjustable upper hinge with 100x74mm mounting plate, zinc-plated. Ø50mm bearing surface, 350kg Rating. Use with the 87PST-M Bottom Bearing hinge for maximum performance.
85PST-G
Steel adjustable upper hinge with 100x74mm mounting plate, zinc-plated. Ø70mm bearing surface, 500kg Rating. Use with the 87PST-G Bottom Bearing hinge for maximum performance.
85XL
Steel adjustable upper hinge with 150x130mm mounting plate, zinc-plated. 110mm wide mounting arm for gate attachment, 4,000kg Rating. Use with the 87XL Bottom Bearing hinge for maximum performance.
